TR-TC03
TR-TC03 Máquina automática completa de engaste de terminales de cable con doble cabezal
- energía
- AC220V/50HZ, 300W
Cotización bajo solicitud Con certificación CE
Máquinas de crimpado de terminales
A terminal crimping machine deforms the terminal barrel around the stripped strands so the joint carries current and resists pull-out. Crimp quality is set by the applicator or die, the crimp height relative to the terminal's window, and the pull force the finished joint withstands — not by press force alone. This is the family entry point and covers both feeding methods and both automation tiers: loose-terminal presses for low volume, banded and reel feed for automatic work, single-head and double-head configurations. Dies and applicators are machined on our own CNC vertical machining centres, so proprietary terminal series can usually be tooled. Send your terminal and we crimp and measure it before you commit.
Compradores por primera vez¿Es nuevo en el procesamiento de alambre? Empiece con nuestra guía de selección y una prueba de muestra gratuita.
DistribuidoresAsóciese con nosotros: OEM/ODM, marca privada y distribución regional.
Clientes existentesRepuestos, servicio y actualizaciones para las máquinas que ya tiene en su línea.
Máquina de engaste de terminales totalmente automática
On a fully automatic machine the terminal feeds itself: cut, strip, crimp and often inspect happen in one cycle with no operator handling the terminal. Throughput is the visible difference, and the real one is consistency — a machine-fed terminal is presented at the same position every cycle, so crimp height varies with the die rather than with how the operator seated the terminal. On our three-in-one crimping platform, output runs 2,200–2,500 pcs/h on wire shorter than 300 mm. This tier is specified when volume justifies it and when the terminal is available banded or on reel; loose terminals do not feed automatically, which is the constraint most often discovered late.
26 modelos
Máquina peladora de cables y engarzadora de terminales
This is the combined machine: the wire is stripped and the terminal applied without the prepared end leaving the machine. The gain is one handling step per wire, and the second gain is that a freshly stripped end is never set down, so strands cannot splay or pick up contamination between the two operations. Selection is defined by the two ends of the machine rather than by the middle: the strip head sets the cross-section range, and the press plus applicator set the terminal series. Single-head and double-head versions exist; the double-head is chosen when both ends are terminated and the wire is long enough to be indexed end to end.
17 modelosSemi-Automatic Terminal Crimping Machine
An operator-fed press is the tier where crimp quality stops depending on how hard someone squeezed a hand tool. The terminal is placed by hand, the press closes, and the operator moves the next wire — which is exactly why this tier belongs to low volume, frequent terminal changes, and jobs where setting up an automatic feed costs more than the batch is worth. Two variants are on this page and they are chosen for different reasons: mute-terminal presses are specified where the press runs all shift and the shop floor has a noise limit, and bulk-terminal presses where terminals arrive loose in quantity. Confirm the terminal series before ordering, because the applicator defines the joint, not the press frame.
23 modelos
Máquina engarzadora de terminales de estaño por inmersión
Some joints must survive more than a crimp. Where a terminated wire goes on to be soldered, resistance-welded, or clamped under a screw, the crimped end is dip-tinned so the strands are locked together and the joint can be reflowed without the strands opening. These machines crimp and dip in one sequence, which avoids re-orienting the wire between operations and keeps flux off the terminal. The variables that matter — solder alloy, flux, and bath temperature — follow your downstream process rather than the machine. If the wires must be tinned but no terminal is fitted, the standalone tin dipping machines are the correct page.
13 modelos
Máquina de engarce de terminales con carcasa de plástico
After the crimp, many harnesses require the terminal to be seated into a plastic shell or housing. Doing it in the same machine removes a station and, more importantly, removes the window in which a correctly crimped terminal can be seated at the wrong depth or in the wrong cavity. Machines on this page crimp and insert the shell in one cycle, with insertion depth and orientation controlled by tooling. Specify the housing part number and the cavity layout — the machine is built around the housing, and a change of housing is a change of tooling. This page also absorbs the auto-insert shell machines offered under an earlier naming convention, which were the same operation.
17 modelos
Máquina de engarzado de terminales para conectores impermeables de inserción
A sealed connector has to keep water out of the contact area, and that depends on a rubber plug or seal being compressed correctly in the connector cavity — which in turn depends on it being placed on the wire in the right order relative to the crimp. Fit it after the crimp and it cannot pass the terminal; fit it in the wrong position and the seal does not compress. Machines on this page place the plug or seal and crimp in one controlled cycle. The specification inputs are the seal part number, the wire insulation diameter that the seal grips, and the connector cavity. Sealing performance is verified on your wire and seal before shipment.
7 modelos
Máquina de crimpado de terminales para cables enfundados
Sheathed and round cable carry an outer jacket that must be prepared before any crimp is possible, and the preparation is what defines these machines: the jacket is stripped to a set length, any filler is cleared, and the conductor is stripped and crimped in the same setup. Machines on this page handle the jacket inside and outside the core, and the family is specified by overall cable diameter rather than by conductor cross-section — a distinction worth stating on an enquiry, because a machine sized for conductor gauge will not accept the jacket. Multiple cores, screened cable and filler construction each change the tooling. Sample cable is run before shipment.
6 modelos
Máquina crimpadora de terminales tubulares de inserción
A number tube or marker sleeve has to be on the wire before the terminal is crimped: once the terminal is on, the tube cannot pass over it. Machines on this page insert the tube and crimp in the same cycle, which removes a handling step and eliminates the sequencing error that turns a completed wire into scrap. Two inputs define the machine — the tube inner diameter, which is set by the wire and the terminal barrel, and the crimp application itself. Print content belongs to the printing page if the tube must also be marked. Where the tube is a heat-shrink sleeve rather than a marker, the heat shrink insertion pages are the correct starting point.
20 modelos
Máquina semiautomática de engarce de tiras de cobre
Not every crimp joins a wire to a terminal. Copper strip and copper tape are crimped onto conductors and shields to create a low-resistance bond over a length rather than at a point, which is used in shielding terminations, busbar connections and battery tab work. The material being crimped is flat, so the tooling is a die set rather than a terminal applicator, and the quality measure is contact resistance and pull strength over the bonded length. Give us the copper width, its gauge, the conductor arrangement and the required bond length. Because the tooling is made for the joint geometry, a sample of your strip and conductor is what we quote from.
11 modelos
Nueva máquina de crimpado de terminales servoeléctrica para vehículos de nueva energía
High-voltage and EV harnesses are crimped on larger conductors and in thicker insulation than 12 V harnesses, and they are inspected to a tighter standard because a marginal joint fails as heat rather than as an open circuit. Servo terminal crimping machines drive the stroke directly instead of deriving force from supply-air pressure, so crimp height and force repeat across a shift rather than drifting with the air line. This is the reason the servo tier is specified on EV work, more than any difference in cycle time. The sizing inputs are the conductor cross-section, the terminal series, and whether a shield or seal is applied. We machine the applicators in-house.
15 modelos
Máquina de cinta de cobre totalmente automática
Copper tape is used to bond a shield or a conductor over a defined length, and an automatic machine does four things without an operator: feed the tape, cut it to the required length, position it, and bond it. Automation matters here for a specific reason — bond length and tape tension decide contact resistance, and both vary when the tape is laid by hand. Sizing runs on the copper width and its gauge, the bond length, and the substrate, which may be braid, foil or a solid conductor. Tapes differ in how they feed, so we ask for your tape roll and run it on the machine before the order is confirmed.
5 modelos
crimpado de la tira de revestimiento del cable
A jacketed cable needs more preparation than a single-core wire: the outer jacket is scored and pulled back, any filler and foil are removed, and the conductor is stripped before the terminal goes on. Doing strip and crimp in one pass on this machine keeps the prepared end from being handled twice, which matters most on cable where the jacket is the mechanical support and pulling it back disturbs the lay of the inner cores. The selection inputs are jacket diameter, core count and terminal series. Machines are configured for the cable in front of us rather than chosen from a range card, so a length of your cable is what we quote from.
4 modelos
crimpado del terminal del servomotor
The argument for a servo press is repeatability, and it is worth stating precisely: a pneumatic press converts supply-air pressure into force, so the force varies with the pressure available at that moment in the shift. A servo press drives the ram to a programmed position with a programmed force profile, and holds it. For terminals near the edge of their crimp-height window, or for joints that are inspected by cross-section rather than by pull test, that difference decides acceptance. These machines use that architecture in single-head and double-head forms. Confirm the terminal series and the crimp-height window from your specification; both are needed before tooling is quoted.
5 modelosFully Automatic
TR-TC05
TR-TC05 Máquina automática de crimpado de terminales de doble cabezal con motor paso a paso
- energía
- AC220V/50HZ, 300W
Cotización bajo solicitud Con certificación CE
TR-TC06
Fully Automatic Cutting Stripping Tapping Terminal Crimping Machine
- energía
- AC220V/50HZ, 300W
Cotización bajo solicitud Con certificación CE
TR-PX1
TR-PX1 Máquina automática de alta velocidad para engarzar terminales de cable de doble cabezal
- capacidad
- 800 piezas/hora para cable 12P (dependiendo del alambre)
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
TR-01S
TR-01S Máquina engarzadora de terminales de cinco cables, totalmente automática y de doble cabezal
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
TR-06
TR-06 Máquina automática para crimpar terminales de cables FFC totalmente automática
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
TR-DS03
TR-DS03 Máquina automática completa de engaste de terminales de cable de doble cabezal
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
TR-T01
TR-T01 Máquina automática de engarzado de terminales de doble cabezal con servomotor Mitsubishi
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
TR-JK1
TR-JK1 Máquina completamente automática de engarzado de terminales, inserción de carcasa de plástico y estañado de un solo extremo
- energía
- AC220V/50HZ, 300W
Cotización bajo solicitud Con certificación CE
TR-HT02
TR-HT02 Máquina crimpadora de terminales totalmente automática con inserción de funda y tubo termorretráctil
- energía
- AC220V 50/60Hz 16A
Cotización bajo solicitud Con certificación CE
Semi-Automatic
TR-2T
Máquina de engarce de cinta de cobre semiautomática Turing TR-2T
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
TR-201
TR-201 Máquina semiautomática de engaste de terminales para cables flexibles FFC
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
TR-6T
TR-6T Crimpadora semiautomática de terminales de 6T
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
TR-4T
Máquina terminal servo semiautomática de 4T TR-4T
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
Modelos en este rango
TR-12
Máquina engarzadora de terminales tubulares TR-12
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
TR-880
Máquina TR-880 para pelado y terminación con enchufe brasileño
- energía
- AC220V/50HZ,
Cotización bajo solicitud Con certificación CE
Por qué elegir Turingnex para Máquina de engarce de terminales
Máquina de engarce de terminales es una decisión de compra real. Esto es lo que obtienes cuando haces un pedido directamente a la fábrica: capacidades verificadas, expuestas claramente.
Directo de fábrica, sin intermediarios
Compre directamente de la fábrica de Dongguan a precio de fabricante, sin margen adicional de empresas comerciales.
Taller con certificación CE e ISO9001
Máquinas con certificación CE fabricadas en un taller con certificación ISO9001, con Alibaba Trade Assurance disponible previa solicitud.
100% de rodaje antes del envío
Cada máquina pasa una prueba completa de rodaje y se graba un video del envío antes de salir del taller.
QC: Raw material check → Machining → Assembly → 100% run-in test → Shipment video
Garantía de 12 meses y piezas de repuesto
Cobertura de garantía en cada construcción, repuestos originales enviados a todo el mundo, soporte remoto incluido.
Prueba gratuita con su material
Envíe sus cables y terminales; realizamos una prueba de engarzado/pelado y compartimos el video antes de que decida.
Matrices personalizadas según su dibujo
Matrices y herramientas fabricadas según su plano final, para que la máquina produzca sus piezas desde el primer día.
Comparación de modelos
| Modelo | energía | aplicación | característica | garantía | MOQ | Precio (FOB) | Acción |
|---|---|---|---|---|---|---|---|
TR-TC03 TR-TC03 Máquina automática completa de engaste de terminales de cable con doble cabezal | AC220V/50HZ, 300W | Industria de fabricación de cables | Rendimiento estable | 1año | 1 juego | Cotización bajo solicitud | Vista → |
TR-TC05 TR-TC05 Máquina automática de crimpado de terminales de doble cabezal con motor paso a paso | AC220V/50HZ, 300W | Industria de fabricación de cables | Rendimiento estable | 1año | 1 juego | Cotización bajo solicitud | Vista → |
TR-TC06 Fully Automatic Cutting Stripping Tapping Terminal Crimping Machine | AC220V/50HZ, 300W | Industria de fabricación de cables | Rendimiento estable | 1año | 1 juego | Cotización bajo solicitud | Vista → |
TR-PX1 TR-PX1 Máquina automática de alta velocidad para engarzar terminales de cable de doble cabezal | AC220V/50HZ, | Máquina terminal de doble extremo | Rendimiento estable | 1año | 1 juego | Cotización bajo solicitud | Vista → |
TR-01S TR-01S Máquina engarzadora de terminales de cinco cables, totalmente automática y de doble cabezal | AC220V/50HZ, | Máquina terminal de cinco cables de doble cabezal | Rendimiento estable | 1año | 1 juego | Cotización bajo solicitud | Vista → |
TR-06 TR-06 Máquina automática para crimpar terminales de cables FFC totalmente automática | AC220V/50HZ, | Carcasa de inserción de crimpado de terminal de doble extremo, estaño chapado | Rendimiento estable | 1año | 1 juego | Cotización bajo solicitud | Vista → |
Precios FOB indicativos. Las especificaciones finales y el plazo de entrega se confirman en la cotización.
¿No está seguro de qué modelo?
Construido y probado en nuestro taller
Cada máquina se ensambla en nuestro taller de Dongguan y se pone en funcionamiento antes del envío. Secuencia de control de calidad: Raw material check → Machining → Assembly → 100% run-in test → Shipment video. Hay disponible un video de prueba con su propio material previa solicitud.
Máquina de engarce de terminales en producción
Lo que dicen los compradores
Referencias de clientes
Solo publicamos cotizaciones verificadas, con la empresa, el país y el contacto identificado. Pídanos clientes de referencia en su mercado y los pondremos en contacto directamente.