Otros
Turing es uno de los principales fabricantes y proveedores de moldes y accesorios de China; a lo largo de los años, hemos establecido buenas relaciones con nuestros clientes para el negocio mayorista de otros productos.
Máquina de ensamblaje de ruedas giratorias
Caster assembly presses a stem or a rivet into a caster body and, where required, fits a brake — a press operation sized by force and stroke rather than by wire. It sits in the auxiliary group because it shares the same machine platforms as the harness equipment: a frame, a press head and a feed system. Machines on this page cover fully automatic and semi-automatic versions, including a single-rivet brake assembly variant and a flat-cylinder model. The specification inputs are the caster part number, the stem or rivet type, the press force required and the target output per shift. Tooling follows the caster geometry, so a sample caster is run before shipment.
8 modelos
Máquina para fabricar hilo dental
Some production lines in our catalogue sit outside the wire harness sector and are built on the same platforms: feeding, cutting, forming and boxing stations arranged around a different product. Dental floss production is one of them — the material is a filament rather than a conductor, and the operations are cutting to length, winding or sealing, and packing. It is included here because the integration work is identical: the line is configured from your product drawing and your shift target, and the stations are sized from those two numbers. If your requirement falls outside the harness range, send the drawing anyway; the answer may be a configured line rather than a catalogue machine.
3 modelos
Piezas para máquina de engaste de terminales y máquina de corte y pelado de cables
Tooling is what makes a crimp, so tooling is what decides how long a machine stays productive. This page covers the parts that wear and the parts that define the joint: applicators, dies and die sets, stripping and cutting blades, feed fingers, and the wear items that sit behind them. Dies are machined in-house on CNC vertical machining centres, which is what allows a die to be made to a customer drawing, including for terminal series we did not originally supply the machine for. Send the machine model and the terminal part number; for a die to drawing, send the drawing. Spare parts are held in our own stock.
13 modelos
Línea de ensamblaje de paquetes de baterías de nueva energía
A battery pack line is not a machine but a sequence of stations, and it is configured rather than chosen from a catalogue: cell sorting and grading, stacking or module assembly, busbar and tab welding, dispensing, and inspection. The sizing inputs come from the pack itself — cell format, module layout, pack throughput per shift — and from how many operators the plant can put on the line. Cells are graded before assembly because a pack is limited by its weakest cell, and pack output is confirmed against the target rather than quoted as a machine rating. We size the stations from your pack drawing and shift target, and the layout is agreed before the schedule is fixed.
8 modelos
Labeling Machine
Labelling is the last operation before packing and the one most often left manual, which is why mislabelled or unlabelled harnesses turn up at incoming inspection. These machines apply labels or markers to a finished bundle, a coil or a component. The specification inputs are label size and material, the print content and its permanence requirement, and the surface the label is applied to — a curved bundle needs a different applicator from a flat tag. Print permanence is a sample question rather than a datasheet question, so we run your label and your print file. This page is being renamed from the current URL, which contains a spelling error; the product line itself is unchanged.
1 modelo
Máquina dispensadora y de respaldo
Dispensing places a measured amount of adhesive, sealant or coating at a defined position; backing application lays a liner or carrier tape onto the same part. Both are volumetric operations, and both fail the same way when they drift — too little adhesive gives a joint that separates, too much gives squeeze-out that contaminates an adjacent surface. Machines on this page run dispensing and backing as a single pass over tape, flat components and formed parts. The specification inputs are the material being dispensed, the volume or bead geometry required, and the substrate. Material rheology decides the pump and nozzle, so we ask for the adhesive datasheet rather than a description.
1 modelo
Máquina espumadora
Foaming fills a cavity with a controlled-density foam so a component is held, insulated or sealed without adding a moulded part. It is a metering process: the two components have to be mixed in the right ratio and poured or injected within the reaction window, which is short and unforgiving. The range covers high-pressure and polyurethane foaming machines and the track-based circular rail lines that carry parts through the pour. The specification inputs are the foam density required, the cavity volume, and the cycle time your line can allow for cure. Because foam density decides both protection and cost, the ratio is verified on a first-article section before shipment.
25 modelos
Máquina cortadora de cables
A cable cutting machine performs one operation: it measures and cuts to length, leaving the insulation intact. Choose it when the ends are terminated elsewhere in the process, when the cut length runs into metres, or when the jacket is too heavy for a combined cut-and-strip head — pneumatic large-diameter cutting is what makes the last case workable. The deciding question is on your drawing: if a strip length is called out, a cut-and-strip machine removes one handling step; if only a length is called out, cutting alone gives a cleaner cut on thick jackets and costs less. Sample cuts on your cable are run before you order.
2 modelos
Máquina para mallado trenzado de alambre y máquina para tubos de plástico
Threading is what happens after the braid exists: wires are passed through a braided mesh sleeve, or a plastic tube is drawn over a finished bundle so the harness gains mechanical protection. Both are feeding problems rather than forming problems, and both fail in the same way when done by hand — the sleeve twists, the pitch varies, or the bundle stops short of the required length. The sizing inputs are mesh or tube inner diameter, bundle diameter and total threaded length, and the mesh pitch if the sleeve must be expanded to pass over connectors. This line is also specified with the wire threading and injection machines that follow it in the same assembly.
1 modelo
Máquina de cepillado de alambre
Brushing removes what termination cannot tolerate: oxide, contamination, loose strands and plating debris on the conductor or the shield before a crimp or a weld is made. It is a preparation step, and skipping it produces joints that pass at first inspection and fail in the field — a welded splice made onto an oxidised surface starts with higher resistance than the same splice made onto clean copper. Machines on this page cover single-wire brushing and the crawler-type and separating machines used on shielding layers. The specification inputs are the wire or braid construction and the surface condition required, and brushing pressure is set so the conductor is cleaned without being reduced in section.
7 modelos
Máquina automática para engarzar anillos de hierro
Ring terminals and iron rings are crimped by deforming a closed or nearly closed ring around a conductor or through a fastening point, which is a different tooling problem from an open-barrel terminal: the ring must close without cracking and without cutting into the strands. This family also covers the cast-iron mute-terminal presses used where a press running all shift has to meet a noise limit on the shop floor — a requirement that appears in the specification more often than machine datasheets acknowledge. The sizing pair is the ring or terminal material and size, and the wire gauge. Terminal samples are crimped and sectioned before the order is confirmed.
2 modelos
Expansor de mangueras
Expanding a hose or sleeve so it can be drawn over a joint is a preparation step that decides whether the following operations are possible at all: if the sleeve cannot be opened to the required diameter without being damaged, no amount of care downstream will produce a sealed joint. The sizing inputs are the hose inner diameter, its wall thickness and material, and the diameter it must reach — a hose stretched beyond its elastic limit does not recover, and the joint leaks. Expansion is done with controlled air or mechanical fingers depending on the material. This is a small line and is usually specified together with the sealing or bundling machine that follows it.
1 modelo
Máquina de moldeo por inyección, embalaje y organización
This line combines moulding with the handling that follows it: parts are moulded, then boxed and arranged into a set pattern rather than dropped into a bin. The arranging stage is the reason these lines exist rather than a moulding machine alone — an oriented part can go straight into the next assembly step, while a bin of loose parts has to be re-oriented by hand. What we need first is the part geometry, the mould (customer-supplied or made to drawing), the cavity count and the required output per shift. Because the line is configured rather than selected, station layout is settled before any delivery schedule is issued. A first-article run is made before shipment.
1 modeloPróximamente los detalles del modelo
La lista completa de especificaciones de esta categoría se está preparando; envíe una consulta y confirmaremos la disponibilidad.
Por qué elegir Turingnex para Otros
Otros es una decisión de compra real. Esto es lo que obtienes cuando haces un pedido directamente a la fábrica: capacidades verificadas, expuestas claramente.
Directo de fábrica, sin intermediarios
Compre directamente de la fábrica de Dongguan a precio de fabricante, sin margen adicional de empresas comerciales.
Taller con certificación CE e ISO9001
Máquinas con certificación CE fabricadas en un taller con certificación ISO9001, con Alibaba Trade Assurance disponible previa solicitud.
100% de rodaje antes del envío
Cada máquina pasa una prueba completa de rodaje y se graba un video del envío antes de salir del taller.
Garantía de 12 meses y piezas de repuesto
Cobertura de garantía en cada construcción, repuestos originales enviados a todo el mundo, soporte remoto incluido.
Prueba gratuita con su material
Envíe sus cables y terminales; realizamos una prueba de engarzado/pelado y compartimos el video antes de que decida.
Matrices personalizadas según su dibujo
Matrices y herramientas fabricadas según su plano final, para que la máquina produzca sus piezas desde el primer día.
Construido y probado en nuestro taller
Cada máquina se ensambla en nuestro taller de Dongguan y se pone en funcionamiento antes del envío. Secuencia de control de calidad: Raw material check → Machining → Assembly → 100% run-in test → Shipment video. Hay disponible un video de prueba con su propio material previa solicitud.
Lo que dicen los compradores
Referencias de clientes
Solo publicamos cotizaciones verificadas, con la empresa, el país y el contacto identificado. Pídanos clientes de referencia en su mercado y los pondremos en contacto directamente.